%Mold% Damage Remediation in %CITY%

%Mold% can produce allergens and irritants and has the potential to cause other health effects. %Mold% can spread quickly through your %CITYNOST% home or business in as little as 48 hours. If you suspect that your home or business has a %mold% problem, we can inspect and assess your property. If %mold% is found, we have the training, equipment, and expertise to remediate your %mold% infestation.

Learn more about %mold% and what to do until help arrives by reviewing these %mold% damage tips.

~unique_content~

%FRANCHISE%

• 24-Hour Emergency Service
• Faster to Any Size Disaster
• Highly Trained %Mold% Remediation Technicians
• Specialized %Mold% Remediation Equipment
• A Trusted Leader in the Restoration Industry
• Locally Owned and Operated

If You See Signs of %Mold%, Call Us Today – %PHONENUMBER%

Understanding Mold

Some restoration companies advertise “%mold% removal” and may even guarantee to remove all %mold%. This is a fallacy because it’s impossible to remove all %mold% from a house or business; microscopic %mold% spores exist almost everywhere, both indoors and outdoors. Here are the facts:

• %Mold% is present almost everywhere, indoors and outdoors.
• %Mold% spores are microscopic and float along in the air, and may enter your home through windows, doors, or AC/heating systems or even hitch a ride indoors on your clothing or on a pet.
• %Mold% spores thrive on moisture. %Mold% spores can quickly grow into colonies when exposed to water. These colonies may produce allergens, irritants, and toxins. 
• Before %mold% remediation can begin, any sources of water or moisture must be addressed. Otherwise, the %mold% may return. 
• %Mold% often produces a strong, musty odor and can lead you to possible %mold% problem areas.
• Even higher-than-normal indoor humidity can support %mold% growth. Keep indoor humidity below 45 percent.

Faster to Any Size Disaster

%Mold% spreads quickly, so a minor %mold% infestation can quickly escalate into a major problem. We’re dedicated to responding immediately when you contact us. A fast response lessens the damage, limits further damage, and reduces cost.

Locally Owned, with National Resources

%FRANCHISE% is locally owned and operated, so we are part of the %CITYNOST% community too. When you have a water or %mold% damage issue, we’re already nearby and ready to help. We’re also part of a network of over %FRANCHISECOUNT%, including special Disaster Recovery Teams placed strategically throughout the country to respond to large-scale fire, water, and storm disasters.

%MOLDSERVINGAREAS%

Highly Trained Water and %Mold% Restoration Specialists

We specialize in water and %mold% damage restoration, with advance training in restoration techniques and the experience and specialized equipment to quickly restore your property.  Learn about our water damage training and certificates.

The %Mold% Remediation Process

Every %mold% damage scenario is different and requires a unique solution, but the general %mold% remediation process stays the same. The steps listed below illustrate our “typical” process:

Step 1: Emergency Contact - %PHONENUMBER%

The %mold% cleanup and restoration process begins when you call us. Our representative will ask a series of questions to help us determine the necessary equipment, resources, and personnel.

Step 2: Inspection and %Mold% Damage Assessment

We carefully inspect your property for visible signs of %mold%. %Mold% feeds on cellulose and water and can be hidden from plain view. We use various technologies to detect %mold% and hidden water sources.

Step 3: %Mold% Containment

To keep the %mold% spores from spreading further, we will use various %mold% containment procedures. Our professionals may use physical barriers and negative air pressure to isolate the contaminated area and to help prevent the mold spores from spreading through your %CITY% home or business. Also, we’ll turn off the property’s fans and heating and cooling systems to prevent the spread of %mold%.

Step 4: Air Filtration

Our specialized filtration equipment allows our professionals to capture microscopic %mold% spores out of the air. We utilize powerful “air scrubbers” and HEPA vacuums to prevent the spread of these %mold% spores while the %mold% remediation is in process. 

Step 5: Removing %Mold% and %Mold%-Infested Materials

The %mold% remediation process depends on the amount of %mold% growth and the types of surfaces on which the %mold% appears. We’ll use antifungal and antimicrobial treatments to eliminate %mold% colonies and to help prevent new colonies from forming. It may be necessary to remove and dispose of %mold%-infested porous materials, like drywall and carpeting, to remediate heavy %mold% growth.

Step 6: Cleaning Contents and Sanitizing

We clean your furniture, decorative items, curtains, clothing, and other restorable items affected by %mold%, using a variety of cleaning techniques to clean and disinfect your belongings. We’re also trained to remove %odors% and provide %deodorization% using fogging equipment.

Step 7: Restoration

Depending on the level of %mold% damage, drywall, subfloors, and other building materials may have been removed. Restoration may involve minor repairs, such as replacing drywall, painting, and installing new carpet; or it may entail major repairs such as the reconstruction of various areas or rooms in a home or business. The restoration step gets your home or business back to normal.

SERVPRO knows %Mold%

Here at %FRANCHISE% we understand what it takes to properly remediate a %mold% situation in %CITY%. Encountering %mold% can be worrisome for any homeowner, but SERVPRO is here to put your mind at ease. We have the right tools and trained professionals to get the job done right. Give us a call at %PHONENUMBER% and we will be on our way to help.